We all know that the production operation of the tire shredder is inseparable from the transmission of the belt, so the maintenance of the belt is also very important to ensure the normal operation of the tire shredder. Then, today we are a professional manufacturer of tire shredders. Teach you seven points to maintain the belt of the tire shredder:
1. The belt of the tire shredder should not be too loose during installation, nor should it be too tight, so the belt should be adjusted in time;
2. The belt of the tire shredder should be protected from direct contact with acid, alkali, diesel, engine oil, gasoline and other items, and it should also be protected from direct sunlight.
3. V-belts produced by different factories or with different levels of new and old cannot be used in the same group, and belts of different specifications and models cannot be substituted for each other.
4. The V-belt of the tire shredder should not be operated at a temperature higher than 60℃.
5. The pulley hole of the pulley has cracks, the groove gap or the groove surface should be replaced in time. The belt has been severely worn and the belt is in contact with the groove bottom, the belt is aging, cracks or plastic distortion. It should be replaced accordingly, and the belts on the same pulley should be replaced at the same time.
6. In order to prevent the tire shredder belt from slipping, belt wax or belt oil should be applied to the working surface of the belt, but it is generally not used. If the belt slips, the tension of the belt can be increased.
7. The belt and pulley of the tire shredder must be clean and tidy daily to prevent dust intrusion.
Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。
Welcome to visit Henan Honest website. If you want to learn more about our equipments, Contact us Now to find out what we can do for you next project!
