What are the characteristics of the leather shredder

The working principle of the leather shredder is that there is a high-speed rotating rotor in the crushing chamber, which drives the alloy wear-resistant hammer to hammer and crush the incoming materials. During the hammering process, due to the impact and inertia, When the material splashes and collides with sparks in the crushing chamber, it may fly out at the feed port, causing danger and injury.

At this time, it is necessary to design the feed port and install an anti-splash device at the feed port. Six characteristics of small leather shredder:

1. Heavy movable knife, broken, the knife is made of alloy steel casting, strong and long service life.

2. The frame plate is thick, can resist high torque, and is very strong.

3. It adopts microcomputer (PLC) automatic control, with start, stop, reverse and overload automatic reverse control functions.

4. The equipment has the characteristics of low speed, large torque, low noise, and dust can reach environmental protection standards.

5. Easy to adjust, low maintenance cost, economical and durable.

6. The thickness of the cutter and the number of claws can be changed according to different materials.

When purchasing a small leather shredder, have you paid attention to the motor of the small leather shredder? Did you choose the right one? The selection of the motor of the small leather shredder is also very important. The electronic heating is a condition, and the load is heavy. The current is high, the motor fan is damaged, the motor bearing is damaged, the motor environment is sealed and the heat dissipation is insufficient, and the environment temperature is high. You can measure the motor current to see if it exceeds the rated current. Check the motor fan and the environment again, the smoke from the motor indicates that the motor temperature is too high, and the development time is burned out when the power is turned off.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。