Why the output of metal shredders will drop

When it comes to the output of metal shredders, this may be one of the issues that users are very concerned about. Sometimes when users use metal shredders, some inconspicuous small factors will also affect the output of the equipment. It is a machine in which a motor drives a blade and a knife shaft to work. Therefore, in order to ensure the power of the metal shredder, it is necessary to do regular inspections and maintain the blades of the shredder to increase the output. However, sometimes the output of the metal shredder decreases due to some inconspicuous operations. What are the specifics? Let's follow the editor to learn together.

1. Some users directly feed the material as soon as they turn on the metal shredder every day. Over time, the motor is likely to be overloaded and the burden is heavy, resulting in a decrease in the output of the equipment. The speed of the metal shredder is generally relatively high, and such a high speed cannot be achieved as soon as the machine is turned on. Therefore, the metal shredder needs to be preheated idling first, and then the material is evenly put into the material after the speed of the equipment is stable. The output of the metal shredder is relatively high, and the crushing quality will be better.

2. In our usual process of using metal shredders, some of us will not pay attention to the purity of the materials. For example, the shredded materials are mixed with other impurities: iron blocks with higher hardness will easily cause the blades to work. When the impact occurs, the blade of the metal shredder is damaged, which reduces the output of the shredder equipment and the service life of the blade.

3. Regularly check the lubricating oil. This is a better maintenance method for the bearing. Of course, the same is true for the metal shredder. The bearing of the metal shredder is mainly the one that drives the blade and the pulley is connected to the power to shred the material. On the other side, the fan pumps materials into the pipeline in the opposite direction. Therefore, the maintenance of the metal shredder bearing is also very important for the output of the metal shredder.

What are the operating procedures for metal shredders? As a very common mechanical equipment, the appearance of metal shredder has brought great convenience to our lives, such as reducing environmental pollution caused by excessive waste plastic, and also reducing the waste of plastic raw materials. Make it reusable. As mechanical equipment, different equipment has its own different operating methods and skills. For some new users, it is very important to master the operating methods and procedures of the metal shredder. Next, our manufacturer will share with you the metal shredder. The operating procedures of the shredder.

First of all, before operating the metal shredder, ensure that there is no problem with the wiring of the equipment. Secondly, check the installation and fixation of the blade and bolts, and whether the rotating rotor is stuck. If everything is normal, you can start the machine. When working, you must first start up and preheat. Boot up and preheating is one of the ways to effectively improve production efficiency. Then you should pay attention to the production of materials. The feeding speed cannot be fast or fast, and the material cannot be increased or decreased, as long as the speed is constant. Only with uniform feeding can the equipment be able to operate the metal shredder normally. Whenever the work is completed, the materials that have not been eliminated should be cleaned up in time to take precautions and facilitate the next use.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。