Which factors affect the output of metal shredder

The main factors are the size of the internal cutter head of the shredder and the size of the power system. At the same time, the factors that affect the output are the size of the feed port and the speed of the feed. I won’t say much about the impact of the shredder machine itself on the output. For details, please consult our sales consultant. The size of the feed opening of the shredder is determined by the size of the hopper and the moving knife box. What are the effects of the feed speed of the shredder production process on the output?

The feed hopper can affect the amount of material that can be put in a unit time, that is, if the metal shredder itself can handle more than the material put in the feed port, the feed speed has little effect, as long as the speed of the material is not Just exceed the storage size of the hopper per unit time. That is to say, if the processing speed is greater than the feeding speed, it will not cause problems such as clogging. In this case, the feeding speed will not have a particularly large impact on the output of the shredder, mainly depending on the processing capacity of the machine itself. For example, the 800-type shredder can process waste light and thin iron sheets, and the output is about 1000kg, or even more. If it processes light and thin materials such as plastics, the output is in the range of 800kg-1000kg. Of course, the model is larger and the processing capacity is larger. If the feeding speed is greater than the throughput speed, it will easily cause the shredder to block the problem. Therefore, to choose the shredder equipment and model, you must first configure the equipment reasonably according to the material situation and the requirements for the output.

At the same time remind users to ensure that production is assured. Before the materials enter the hopper, please find out which materials cannot be shredded. For details, please consult the relevant personnel of our metal shredder to avoid damage to the machine. During the feeding process, if the feeding port is blocked, do not clean it by hand, and stop the machine to clean the blockage. If you use motor power, you should cut off the power first before troubleshooting. There should be no fireworks on the work site, and the method of increasing the speed cannot be used to increase the output. Maintenance cannot be ignored. When the scrap metal shredder is in operation, the bearing temperature should not exceed 50 degrees. If the bearing temperature continues to rise under normal working conditions, it should be shut down immediately for inspection to find out the cause, troubleshoot, and solve the problem. Add lubricating grease to each bearing position regularly.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。