In terms of the installation of the shredder, we have obtained some data and methods through customer feedback and operation experiments. Let me introduce you to the installation tips of the shredder:
The main engine and the motor are fixed on the same base, mainly to strengthen its stability. The ground should be leveled during installation, ensure the line of the main wheel and the motor wheel correspond, and ensure that the conveyor belt has an appropriate tensioning stroke. The installation of auxiliary equipment can be determined by the customer according to the site conditions and without safety hazards and normal working conditions. All connecting parts need to be filled with gaskets. The power circuit of the whole machine must be connected by professionals. Before starting the system, check whether the connection parts are loose, whether the bearings and other parts that need to be lubricated are lubricated, and start the machine to see if the steering is consistent with the marked steering. After all inspections are completed , Can start the whole machine slowly.
1. Strictly check whether the installation of each part of the machine meets the requirements before starting. Do not drop metal objects into the machine. First move the belt with your hand to perform a test run to see if there is any phenomenon such as biting, rotating and bumping the shell to avoid occurrence. accident.
2. Power-on sequence: turn on the main power first, and then jog the machine several times until it starts normally.
3. It should be kept evenly when adding materials, and it is strictly forbidden for metal hard blocks to enter the feeding port.
4. During use, the motor load should not be overloaded and keep normal operation.
5. Before the equipment runs normally, run it at no-load for a period of time, and check each component in detail. If there is any abnormality, it should be repaired in time and no-load again until the no-load operation is normal before it can be used.
6. The wear procedures of the blades and grinding plates should be checked frequently. If the blade grinding plates are found to be severely worn, they should be replaced in time.
7. When shutting down, stop the host first, and then cut off the main power supply. When the equipment is not in use, clean all parts of the equipment, clean and replace bearing lubricants, shield the equipment with dust, and try to avoid rain and exposure to the equipment.
Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。
Welcome to visit Henan Honest website. If you want to learn more about our equipments, Contact us Now to find out what we can do for you next project!
