How to slove the sudden shutdown of aluminum scrap shredder

In the process of shredding and disposing of aluminum scrap, the blade of the aluminum scrap shredder may come into contact with the harder aluminum material, and material jam may occur, which may lead to shutdown. This is for sure if the power is off. Whatever the reason, it must be inspected and repaired under the condition of ensuring safety.

1. If a sudden shutdown accident occurs, the power supply must be cut off immediately to avoid other accidents during operation and production.

2. To see if the discharge port is blocked, the operator must strictly follow the instruction manual, and do not blindly feed the shredder to the shredder in order to avoid exceeding the load capacity of the machine. If material blockage occurs, stop the machine in time to remove the blockage at the discharge port of the metal shredder to ensure unblocked discharge.

3. Frequently check components: When the machine is working normally, always check the machine components, such as the tightness of the V-belt, the wear of the bearing and its heating, the wear of the tool, whether the line is aging, or broken.

4. When the voltage is too low, the power supply should be cut off immediately: the power supply voltage of the working environment is too low, so that the host does not have enough power to break when encountering large materials. Check whether the power supply is normal, and adjust the voltage of the workplace to make it meet the voltage requirements of the equipment.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。