Introduction to the correct use of metal shredder

The correct use of metal shredder is as important as maintenance. The correct use method can better maintain the machine and bring greater benefits to oneself. But no matter what kind of machine there will always be some problems and malfunctions. Let's talk about the operation method of the metal shredder.

The operation method of the metal shredder is also for the safer, longer-lasting use of the equipment, paving the way for maintenance and reducing more wear. The operation method is as follows:

1. Feeding can only be started after normal operation after idling for a few minutes.

2. The materials that need to be shredded should be evenly added into the shredding cavity. Side feeding or full filling should be avoided to prevent unilateral overload or overload.

3. Under normal conditions, the temperature rise of the bearing does not exceed 35°C, and the maximum temperature does not exceed 70°C. If it exceeds 70°C, it should be shut down immediately, find out the cause, and eliminate it.

4. Before stopping, stop the feeding work first, and turn off the motor after the shredded material in the shredder cavity is completely discharged.

5. During shredding, if the machine stops due to material blockage in the shredding cavity, the motor should be turned off immediately, and the material must be removed before restarting.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。