What are the reasons for the shredder machine bearing heating

When the shredder equipment is working, the bearing will generate heat, which directly affects the normal operation and production power of the equipment. During the operation of the shredder equipment, the heating of the bearing and the noise of the bearing part should be dealt with in time. What are the reasons for the appearance of bearing heating?

1. Oil leakage from the oil pipe, lack of oil supply pressure;

2. The oil pipe is blocked and the lubricating oil does not move smoothly;

3. The lubricating oil is too dirty and mixed with debris;

4. The space between the bearing bush and the shaft is too small;

5. The selection of lubricating oil is not suitable, the particle size is too large or too small;

6. The oil heater was not turned on before the rebar shredder was started in winter, and the oil was too sticky;

7. In summer, the lubricating oil from the oil pump does not pass through the oil cooler, or the oil cooler has defects, such as blockage of water pipes, poor water flow, and water interruption;

8. Defects in the bearing circulating cooling water device, such as blockage, etc.;

9. The discharge port is adjusted too small (the thrust plate is too long), so that the eccentric shaft is subjected to too much force;

10. The drive belt of the steel bar shredder is too tight, and the bearing is too stressed.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。