Daily maintenance of plastic shredder

The emergence of plastic shredders has brought great help to the cause of environmental protection. It not only has a wide range of work, but also has high output, far exceeding the traditional plastic processing system. As a mechanical equipment, only regular maintenance In order to ensure the normal operation of the plastic shredder, it cannot be ignored, so what do the plastic shredders need to do during maintenance? The following is the analysis for you.

1. When the plastic shredder performs the shredding operation, the first thing to pay attention to is the speed of feeding, neither too fast nor too slow, and it is necessary to keep the feeding at a uniform speed as much as possible. Do not let the shredder often work under overload, so as not to accelerate the damage of the equipment.

Second, secondly, regularly check the screws of various parts of the plastic shredder to check if there is any looseness. If so, do not start the machine and work first, and then work after tightening it to avoid danger. Mainly check the anchor screws, lining screws, bearing screws and other parts.

3. The inspection of the parts of the V-belt should also be carried out frequently, so as not to find the looseness in time, thus affecting the work efficiency.

Fourth, lubricate the machine regularly and refuel the bearing, and ensure that the temperature of the bearing should not be higher than 70 degrees, so as to avoid the failure of the plastic shredder.

5. If the various parts of the plastic shredder are worn out, they must be replaced in time. During the replacement process, don't forget to turn off the machine first to avoid danger.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。