How to solve the blade wear problem of metal shredder

As a widely used mechanical equipment, the metal shredder has solved many problems caused by too much scrap metal in our lives. However, the blade, as the core accessory of the equipment, is at work because of its The characteristics are often subject to wear and tear. In our use, we suddenly found that the production efficiency cannot meet the demand. It should be that the wear of the blade is more serious. At this time, how should we solve such a problem? Let's follow the professional manufacturers to find out.

How to solve blade wear

If the wear of the blade of the shredder is not very serious, it can be repaired. The grinding method of the blade of the metal shredder is not the same as that of other types. The mouth part is ground, and the blade of the metal shredder can only be repaired along the arc of the blade due to its special structure, so that the loss of the blade is relatively small, and it is also an effective repair method.

If the wear is too serious, it needs to be replaced. When replacing, pay attention to the model of the blade, and adjust the height and vertical height of the blade. After adjustment, immediately press the bolt of the tool to prevent the blade from moving. If it is damaged to a certain extent, then add lubricating oil and start the test machine. If everything is normal, the work can be carried out.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。