The correct way to use the metal shredder

Metal Shredder is a professional shredding equipment used to shred scrap metal. For the shredder, the importance of the operation method is self-evident. The correct operation method can improve the output, while the wrong method may cause the equipment to malfunction, thus affecting the production efficiency. Let me share with you the correct way to use the shredder.

1. The equipment must be idling before starting to work, to ensure that there is no problem with the equipment, and the production will be carried out.

2. When the metal shredder is working, the operator should not face the direction of the feeding port of the shredder, so as to prevent some materials from jumping out of the feeding port and being injured. The operator should pay attention not to exceed the safety range when feeding.

3. Before the shredder works, it is necessary to check whether the parts are fastened. Once loose, it must be fastened in time. If it is found that the tightness of the belt of the metal shredder is not suitable, adjust the tightness of the belt in time.

4. The pulley of the shredder cannot be replaced at will. Too high or too low speed of the pulley may affect the working performance of the metal shredder.

5. When the work of the day is completed, the staff should clean up the inside of the shredder in time and add lubrication to the bearings.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。