What to do if the bearing of metal shredder is heated?

The metal shredder is a kind of shredding equipment with very good development prospects. Everyone knows that there will be some small problems in the work of mechanical equipment. Although it is a small problem, it is necessary for survival efficiency and personal safety. , but also to avoid it, the following will explain to you what to do if the bearing of the metal shredder is heated?

The bearing is the core component of the shredder equipment. If there is a problem, it will directly affect the production efficiency. If the bearing seat is uneven, or the rotor of the motor and the rotor of the shredder are not concentric, the bearing will be impacted by additional loads. This will cause the bearing to overheat. If this happens, immediately stop the inspection to avoid bearing damage. In addition, if the bearing cap and the shaft are too tight or the bearing and the shaft are too loose, the bearing will overheat. Once this happens, the bearing should be removed, the friction parts should be trimmed, and then reassembled as required.

If the lubricating oil is too thick or too thin, it will also cause the bearing to heat up, because most of the heat generated by the bearing is carried away by the lubricating oil. The heat is taken away, which causes the bearing to heat up. If the lubricating oil is too thin, there is no way to form a protective film, the bearing will rub directly, and the heat generated will become faster. Therefore, it is necessary to add lubricating oil in regular quantities according to the instructions of the equipment, so as to prolong the service life of the bearings of the metal shredder equipment.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。