How to solve the abnormal vibration of metal shredder

A metal shredder is a mechanical device specially designed to process scrap metal. As mechanical equipment, it is inevitable that there will be failures of one kind or another in daily work. If there is abnormal vibration in the metal shredder during the production process, how should we solve it?

First, consider that the rotor of the metal shredder is not concentric. We can move the position of the motor to the left or right, or add pads under the feet of the motor to adjust the concentricity of the two rotors .

Second, when the vibration frequency of the metal shredder is high, it may also be caused by the non-concentric connection between the coupling and the rotor, or the uneven quality of the flat hammer inside the rotor. At this time, corresponding methods should be taken according to different types of couplings.

Three, the vibration of the metal shredder may also be caused by the equipment itself not reaching the balance. This may be because the metal shredder is not securely fastened. At this time, we should tighten the anchor bolts so that the entire equipment is in a horizontal position. In this way, the vibration of the metal shredder can be avoided.

In short, if the metal shredder vibrates during the production process, it must be stopped immediately to check, find out the cause and take measures to deal with it.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。