The correct way to use the metal shredder

The metal shredder is cheap and powerful. It is a professional shredder equipment for shredding scrap metal, and is mostly used for shredding various scrap metals. For the shredder, the importance of the operation method is self-evident. The correct operation method can improve the output, while the wrong method may cause the equipment to malfunction, thus affecting the production efficiency. The correct way to use the shredder.

1. The equipment must be idling before starting to work, and the feeding production is carried out under the condition that there is no problem with the equipment.

2. When the metal shredder is working, it should not face the direction of the feeding port of the shredder, so as to avoid some materials being injured by jumping out of the feeding port, and the operator cannot wear it when feeding the material. items to avoid injury due to these items entering the device. And be careful not to exceed the safety range when feeding.

3. Before the shredder works, it is necessary to check the tightening of the parts. Once looseness is found, tighten it in time. If it is found that the tightness of the belt of the metal shredder is not suitable, adjust the tightness of the belt in time.

4, and the pulley of the shredder cannot be replaced at will, so as to avoid the high speed caused by the replacement of the pulley, which will have a serious impact on the shredder. If the speed is too low, it may affect the metal shredding. machine performance.

5. When the work of the day is completed, the internal hygiene of the shredder should be cleaned up in time, and the bearings should be lubricated so as not to affect the next production.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。