Safety operating procedures of crocodile shearing machine

Crocodile shearing machine is suitable for metal recycling processing plants, scrapped car dismantling yards, smelting and casting industries, and cold shearing various steel and metal structural parts to process them into qualified charge.

Safety operating procedures are as follows:

1. The crocodile shearing machine should be operated by a designated person, and other people should not use it arbitrarily without training.

2. Before driving, check whether all parts are normal and whether the fasteners are firm.

3. It is forbidden to cut unannealed steel, cast iron, soft metal, too thin workpieces, workpieces with a length of less than 100 mm, and workpieces that exceed the length of the scissors.

4. During operation, the human body is not allowed to approach the transmission part and the knife edge of the equipment, and attention should be paid to the safety of the surrounding personnel to prevent the material from being lifted and hurting people. When cutting, the material should be cut as close as possible to the inside of the knife. When cutting short materials, the hand-held workpiece should not be used for feeding, and clamps should be used for feeding.

5. When the crocodile shearing machine is running, the operator is not allowed to leave the post without authorization. When the work is completed or temporarily leaves the post, the power supply should be cut off. At the same time, it is not allowed to repair or touch the moving parts with hands while the machine is running, and it is strictly forbidden to put hands or feet in the material box. Press the material.

6. The lubricating parts of the crocodile shearing machine should be filled with lubricating oil at least once per shift as required.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。