Introduce the operation skill for the scrap metal shredder

Metal shredders play an important role in the treatment of waste plastics. Since there are more and more types of equipment for processing waste, targeted equipment can better shred materials with this characteristic, greatly Improve production efficiency, but also save money for manufacturers.

First of all, the metal shredder starts the equipment after the power is turned on. After confirming that everything is normal, it first performs idle preheating, and then puts in the materials that need to be shredded; when the materials in the knife chamber are completely broken, put in new of materials. If a fault occurs during work, the device must be turned off immediately and the power supply must be cut off before processing. After the fault processing is completed, the device can be restarted.

Then when the work is finished, turn off the switch, cut off the power supply, then open the knife chamber and the crushed material bin, clean up the remaining materials and then close the crushed material bin, remember to tighten the fixing screws; put the broken plastic, Classify and put them into woven bags, place them in the designated location of the workshop and clean up the equipment and the surrounding ground.

During the operation, be sure not to put too much material at one time, which will easily cause jamming or burn out the motor; during the operation of the equipment, it is strictly forbidden to put your hand into the shredder to avoid injury; It is strictly forbidden to put metals, stones and other hard objects into the shredder to avoid damage to the blades; it is strictly forbidden to place water bottles, scissors, blades and other sundries on the equipment to prevent foreign objects from falling into the feed port and damage the equipment; regular inspection of the operating parts Carry out lubrication maintenance.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。