what should be done if the metal shredder bearing heats up?

The metal shredder is a kind of shredding equipment with very good development prospects. Everyone knows that there will be some small problems in the work of mechanical equipment. Although it is a small problem, it is for the sake of survival efficiency and personal safety. , but also to avoid it, the following will explain to you what should be done if the metal shredder bearing heats up?

The bearing is the core component of the shredder equipment. If there is a problem, it will directly affect the production efficiency. If the bearing seat is uneven, or the rotor of the motor and the rotor of the shredder are not concentric, the bearing will be impacted by additional load. This will cause the bearing to overheat. If this happens, stop the machine immediately and check the work to avoid bearing damage. Also, if the fit between the bearing cover and the shaft is too tight or the fit between the bearing and the shaft is too loose, the bearing will overheat. Once this happens, the bearing should be removed, the friction parts should be repaired, and then reassembled as required.

If the lubricating oil is too thick or too thin, it will also cause the bearing to heat up, because most of the heat generated by the bearing is taken away by the lubricating oil. The heat is taken away, which causes the bearing to heat up. If the lubricating oil is too thin, there is no way to form a protective film, and the bearing will rub directly, and the heat generated will become faster. Therefore, it is necessary to add lubricating oil at regular intervals according to the instructions of the equipment, so as to prolong the service life of the metal shredder equipment bearings.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。