how to solve the problem when the blade is worn out?

The blade is an important part of the metal shredder. Its use will directly affect the output and shredding efficiency of the metal shredder. Inspection is essential. If the blade is worn out, it should be repaired in time, otherwise it will lead to a decline in the output of the metal shredder. So how should we solve the problem when the blade is worn out? The following will share with you how to solve these three situations in the blade.

1. If the blade becomes blunt without wear, this problem may be because the blade lubrication effect of the metal shredder is not particularly good, or there is material residue attached to the blade. At this time, we need to Take out the blade for cleaning, and inject lubricating oil into the surface of the blade.

2. If the blade becomes blunt due to slight wear and tear, this is a slight wear. At this time, we only need to take out the blade of the metal shredder, and then simply clean and remove the blade Remove the dirt and material residues on the surface, and then grind the blade. When the grinding is completed, reinstall it and apply lubricating oil to start working.

3. If the blade is seriously worn, because the blade wear is already very serious, it may not be able to be polished and repaired, so you can only replace the new blade to solve the problem. When purchasing a new blade, it should be noted that the new blade must be the same material, length, and weight as other blades on the cutter head. Only in this way can the stability of the cutter head be ensured.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。