How to solve the abmoral vibration of metal shredder

The metal shredder is a mechanical equipment specially used to process metal. The waste plastic processed by the metal shredder not only improves the utilization of resources, but also reduces the waste of raw materials, and also improves our living environment. , but as a mechanical equipment, one or another failure will inevitably occur in daily work. For example, if a metal shredder vibrates during production, how should we solve it? The editor below will analyze and answer for you.

1. If it is caused by the non-concentricity of the rotors of the metal shredder, we can move the position of the motor to the left or right, or add pads under the motor feet to adjust the concentricity of the two rotors. .

2. When the vibration frequency of the metal shredder is high, it may also be caused by the non-concentric connection between the coupling and the rotor, or the uneven quality of the flat hammer inside the rotor. At this time, corresponding methods should be adopted according to different types of couplings.

3. The vibration of the metal shredder may also be caused by the equipment itself not reaching balance. This may be because the fixation of the metal shredder is not strong enough. This problem can be easily solved. You only need to ensure that the metal shredder is firm. The anchor bolts should be tightened to avoid vibration of the metal shredder. phenomenon.

In short, if the metal shredder vibrates during the production process, it must be stopped immediately for inspection, find out the cause, and take measures to deal with it.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。