Main reasons for the production decline of scrap metal shredders

The materials that scrap metal shredders need to shred are generally hard metal products, and they often work under harsh conditions. In this case, no matter how good the mechanical equipment is, problems and failures will inevitably occur after long-term operation. The biggest problem is that the scrap metal shredder has a decline in production. Although the scrap metal shredder is fully automatic at work, it does not mean that the staff can let go completely. Mechanical equipment requires more careful maintenance. If it is not carefully maintained, the shredder will also "strike". Here are the main reasons for the decline in the production of scrap metal shredders:

1. If the production of the scrap metal shredder gradually decreases. It is very likely that the spacing of some major working parts has become larger. The corresponding solution is to first adjust the gap between the screens of the main machine of the scrap metal shredder, and then adjust the air volume of the induced draft fan.

2. If the production of the scrap metal shredder has dropped significantly in recent times. Then it is necessary to consider the problem of the tool of the shredder main machine. Generally speaking, this is because the tool of the shredder is severely worn, so it is necessary to re-grind the tool or replace it with a new one.

Third, if the output of the scrap metal shredder suddenly drops and then recovers immediately. There are two reasons for this failure: one is that the feed is paused or reduced, and the other is that the pipeline is blocked. The solution is to check and adjust the feed speed to achieve uniform feeding, then stop the machine to check and remove the blocked part of the pipeline, and then clean it to solve the problem.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。