Daily use precautions for the two shaft shredder machine

1. Before starting the two shaft shredder machine, ensure that the main machine is stable and does not swing back and forth.

2. Before starting the two shaft shredder machine, check whether the connecting bolts are tightened. If they are loose, tighten the bolts before starting the machine.

3. Before starting the two shaft shredder machine, the reducer and bearings should be oiled as required.

4. After the first start-up, observe the rotation direction of the two main shafts of the shredder. The main shaft of the shredder is required to rotate toward the inside of the main machine. If there is an error, adjust the options and restart.

5. When starting the two shaft shredder machine for the first time, run it idle for 10-20 minutes to make sure there is no abnormal noise or abnormal phenomenon. After it runs normally, you can feed the machine for testing.

6. The first test feed should be even and not too strong. If there is no problem with the test, you can feed the machine evenly and work normally.

7. Do not place your head, hands or other parts close to the feed port during work to prevent splashing objects from injuring your body and endangering your life during the shredding process.

8. When repairing the two shaft shredder machine, you must: turn off the power and shut down the two shaft shredder machine, repair it by one person, disassemble and assemble the equipment according to the repair instructions, and do not knock or even smash the important parts of the two shaft shredder.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。