How to avoid the strong shaking when the metal shredder is working?

The complete set of metal crusher equipment includes feeding conveyor, crusher host, discharging conveyor, sorting machine and other equipment. The manufacturing process is complex and the cost is high. The metal crusher has a large processing range and high productivity. It can sort out non-ferrous metals, separate scrap metal impurities, and crush and process high-purity high-quality metal crushed materials. The pollution to the environment during the processing is small. It is an ideal equipment for scrap metal crushing and processing.

What is the reason for the strong shaking of the host when the metal crusher is working, and how to deal with it?

1. Check whether the hammer head in the metal crusher cavity is installed correctly. If the hammer head is installed in the wrong direction, it will cause vibration and abnormal noise during operation.

2. The weight of the two corresponding hammer heads of the metal crusher cannot differ too much, and should be controlled within 5 grams.

3. If the hammer head is stuck too tightly and the metal crusher is not thrown off during operation, it will cause the hammer head to be unbalanced under high-speed rotation. You can manually rotate it after stopping the machine to check.

4. The weight of other parts on the metal crusher rotor is unbalanced, and needs to be carefully checked and adjusted.

5. Check whether the main shaft is deformed and the bearing is damaged, and replace the problem parts in time.

6. If the nuts fixing the four bottom corners of the metal crusher are loose, it will also cause the crusher to vibrate, and it needs to be tightened in time.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。