The quality of the twin-shaft shredder is important, but the correct installation is also necessary. We can't tolerate some small installation details that cause the double-shaft shredder to not work properly, or affect the life of the double-shaft shredder. So what details should be paid attention to when installing the double shaft shredder? Then let's find out.
1. Check the line problem. Before the installation of the twin-shaft shredder, the circuit problem is more basic and important. This means that before installation, we must first select the appropriate circuit and check whether the circuit is normal to ensure the normal operation of the double-shaft shredder. What we need to pay attention to is that we have to install an additional switch knife in addition to the switch of the double-shaft shredder. Once a problem occurs, this knife can be used to directly cut of the circuit.
2. The double-shaft shredder needs to be fixed after installation to ensure that there is no looseness. Many people ignore this problem. They think it's normal for large machines to loosen a little bit, and there is no need to worry about it. Is it really the truth? On the contrary, if the double-shaft shredder is not fixed when it is installed, the long-term production will easily cause the double-shaft shredder to become weak. With the increase of time, the loosening of the double-shaft pulverizer has become more severe, and the resulting vibration has also been continuously intensified. In the end, the noise of the twin-shaft shredder is getting louder and louder, and the service life is greatly shortened.
3. Carry out empty machine detection. In order to further ensure that the double-shaft shredder can work normally, after its installation is completed, we must carry out an empty machine inspection. The method is to open the double-shaft shredder for idling. If there is no abnormal situation after a few minutes, it means that there is no problem with the installation of the double-shaft shredder, and the double-shaft shredder can start production work immediately. If there is an abnormality, you need to check the problem and wait for the problem to be solved before putting it into production. During the installation process, if necessary, you can call our technical staff at any time, and they will provide you with more professional and authoritative free guidance.
Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。
Welcome to visit Henan Honest website. If you want to learn more about our equipments, Contact us Now to find out what we can do for you next project!
