Maintenance methods of the metal shredder

Today, I will introduce the maintenance methods of the metal shredder. When using a metal shredder, the operation of the shredder should be observed. If you encounter an abnormality, you must stop the inspection in time.

1. The blade falls off or breaks: When the auxiliary blade falls off, the product fineness will suddenly become thicker and fluctuate. At this time, the pulverizer body swings lightly, so it should be shut down and checked in time.

2. The control panel is not aligned: During the operation of the metal shredder, the control panel may move inward or outward due to the vibration of the main body, resulting in changes in the fineness of the product. At this time, it is also necessary to check whether the size of the control panel is uniform in order to correct it in time.

3. The cutting tube of the inner shell is blocked: When the cutting tube is blocked, the coarse material accumulated in the inner shell can overflow from the return air blade to the finished product of the shell, causing the product's fineness to suddenly thicken. At this time, the load of the hoist will decrease rapidly, and the inspection should be stopped immediately.

4. The material discharged from the mill becomes rough: due to changes in the performance of the shredded material or incorrect feeding operation, the shredded material suddenly becomes rough. At this time, the feed amount should be adjusted first to restore the material balance, so that the fineness of the crushed material reaches the normal control range.

The metal shredder specializes in the crushing and crushing of metal garbage or metal materials. The problem can only be found in use. Honest has a professional after-sales service team. We will provide every customer who purchases the most comprehensive service.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。