How to properly maintance the aluminum scrap shredder

We should all know that if the machine is used improperly, the effect will not be very good, so only the correct method can truly understand the final effect of the machine. In the process of using the scrap aluminum shredder, some people do not use the aluminum scrap shredder with a particularly satisfactory effect. It is most likely that it is not used correctly. The maintenance of the machine is an extremely important and frequent work. It should be closely coordinated with the extreme operation and overhaul. Only more maintenance can make the life of the machine longer and bring greater benefits. Then let us take a look at the use and maintenance of the scrap aluminum shredder.

1. Before starting the test run, strictly check whether the installation of each part of the machine meets the requirements, whether the screws and bolts are loose, you can gently pull the belt with your hands to try it, whether there is any phenomenon such as bumping the shell. At the same time, check the direction of rotation, and it is strictly forbidden to crush flammable and explosive materials to avoid accidents.

2. During production, uniform feeding should be maintained to ensure the crushing quality and normal production. At the same time, it is strictly forbidden to overload the motor to ensure the normal operation of the machine.

3. In addition to checking the tightness and looseness of various parts frequently, attention should also be paid to checking the wear and tear of the wearing parts. If the wear is serious, it should be replaced in time to avoid damage to the main components. And take necessary fire prevention measures.

4. Due to the high speed, in addition to the correct and firm installation, good lubrication should be maintained at the same time to maintain the normal operation of the machine. Under normal circumstances, it is normal that the bearing temperature does not exceed 70 degrees. Add butter and molybdenum disulfide to the bearing of the main engine once a week, and the effect of high-speed butter is better.

In order to ensure the normal effect of the machine, the normal steps and methods should be followed to achieve a certain effect. Before using the machine, you must carefully check whether each component can operate normally. The most important thing is to check the direction of rotation. Do not put flammable and explosive materials into the machine to break them. Regular inspection and maintenance can ensure the long-term working efficiency of the machine and extend the service life of the machine. I hope anyone who owns a scrap aluminum shredder can take good care of the machine.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。