How to properly maintain the metal shredder

The metal shredder is a kind of equipment that is often used in the industrial production process. The equipment has high production efficiency and can effectively shred various materials. Today, I will tell you how to properly maintain the metal shredder:

1. Check and clean up in time. After each day's work, the machine should be cleaned in time to check whether the screws in various parts are loose and the wear of wearing parts such as claws and sieves.

2. Grease is added, and it is commonly used to assemble a cover-type oil cup on the bearing. Under normal circumstances, as long as the oil cup cover is rotated 1/4 turn every 2 hours, the grease in the cup can be pressed into the bearing. In the case of enclosed bearings, grease can be added every 300 hours. After long-term use, if the grease is deteriorated, the bearing should be cleaned and replaced with new grease. When the equipment is working, the bearing temperature should not exceed 40℃. If the bearing temperature continues to increase under normal working conditions, the reason should be found out and the fault should be solved.

3. Carefully clean the raw materials to be pulverized, and it is strictly forbidden to mix metal parts such as copper, iron, lead and other sundries and large stones into the pulverizing chamber.

4. Do not increase the speed of the shredder at will, generally allow a difference of 8-10% from the rated speed. When the shredder works with a large power, attention should be paid to control the flow and make the flow uniform, not fast or slow.

Metal shredder equipment can shred all kinds of metals, whether you have recycled cans, paint buckets, or even scrapped car shells, metal scraps, iron pins, etc., all kinds of metal waste, our metal Shredder equipment can be handled very well!

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。