How to slove the blockage of metal shredder

In the production process of metal shredder equipment, blockage is a problem that the operation is more afraid of. In order to solve this problem, many customers will learn a lot of methods to prevent blockage, so that it can minimize the occurrence of blockage. If the metal shredder equipment has been blocked, how should we solve it? The following methods are provided by the shredder manufacturer for you:

First of all, if we find that there are very few blockages during production, we must first reduce the blanking. Check to see if it is because there are materials that are not suitable for shredding, and then check whether the blade is worn. If there is no problem, start production again.

Secondly, after the above problems are eliminated, there will still be blockages during production. We need to see if our feeding speed is too fast. If the feeding speed is too fast, it is necessary to adjust the feeding speed, which can solve the problem of material blockage very well.

If the blockage cannot be eliminated during production, it must be shut down in time. If the material is blocked too much, it will cause damage to the tool. We also need to check whether the distance adjustment between the blades is correct, and whether the blades are installed properly.

After the above inspection and treatment, the problem of clogging of the metal shredder equipment can be well solved.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。