Which factors cause the decline output of metal shredders?

Metal shredders are more advantageous in the processing of metal scraps. Customers of metal shredders use complete sets of shredders. Automatic feeding not only ensures the rapid progress of production, but also scrap metal The feeding is uniform, which can prevent the material from clogging. At the same time, manual operations are reduced, production costs are saved, and the production safety factor is improved. So how to solve the sudden decline in output of metal shredders in normal production?

First, the output of metal shredders gradually declined.

Problem Analysis:

1. The hardness of the material to be processed is too high and the humidity is caused.

2. The gap between important working parts increases. The corresponding solution is to first adjust the screen gap of the metal shredder cutter head, and also need to adjust the air volume of the induced draft fan.

3. The problem of operation method, the staff did not operate according to the regulations, the feeding was too much or too little, and the feeding was uneven. It will lead to a decrease in the output of the crusher.

Second, the output of metal shredders has dropped significantly.

When the output of the metal shredder is greatly reduced, it is necessary to check the wearing parts of the shredder to see if it is caused by serious wear and tear. Wear parts of the same shape may have different effects due to different materials and production methods. In addition, the production output and the life of wearing parts of the shredder with unreasonable design will be greatly reduced.

The above is an analysis of the decline in the output of metal shredders. If you want to know more about the output of metal shredder equipment production lines, please consult our factory.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。