Notes on the operation of metal shredder

The metal shredder equipment is reliable in operation, simple in maintenance and low in operating cost. The equipment can flexibly select the shredder tool according to the material type and discharge size requirements. According to the number of spindles, it can be divided into two-shaft shredders and four-shaft shredders, which can be widely used in various recyclable, large-volume, high-hardness Material is one of the core equipment for metal recycling and crushing.

Notes on the operation of metal shredder

1. It is necessary to strengthen the screening of feeding materials to prevent some large pieces of high-hardness metal blocks from entering the shredding cavity, and imitating the falling of the knife shaft to damage the shredder, resulting in a parking accident.

2. Some viscous materials are easy to block the crushing space. When dealing with blockage faults, it should be stopped and cleaned up manually.

3. When the material to be processed contains a lot of large pieces, it should be noted that the large pieces of material are easily squeezed out from the crushing space to prevent injury to people or damage to the equipment.

4. After the metal shredder runs for a long time, the cutting efficiency of the equipment will be reduced due to the dull cutting of the cutting tool and the greater wear and tear. At this time, attention should be paid to replacing the cutting tool in time and overhauling the equipment.

5. Strengthen the inspection of the equipment, and refuel the lubricating parts of the reducer on time to keep the equipment in a good lubricating state.

6. For safety, the feed inlet and transmission part should be installed with safety cover according to the actual situation.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。