Operation of metal shredder equipment

Metal shredder equipment is a shredding equipment for recycling scrap metal resources. It adopts new automatic control technology in manufacturing and processing technology to enable users to produce more economically. Its technological process is simple and easy to use. The materials that need to be shredded can be placed on the conveyor, and one or two people can control the host equipment to complete the entire processing process.

The metal shredder has the advantages of strong production capacity, high production level, low noise and no pollution. Now, the scrap shredder equipment has been successfully settled in many regions, which further confirms the practicability of the machine in the recycling industry. .

Operation of metal shredder equipment:

1. After the production line of the metal shredder is turned on, it will idle for 3-5 minutes before feeding. It should be reversed for 3-5 minutes before shutdown to ensure that there is no material in the cavity during shutdown;

2. Check whether the screws of the whole machine are loose from time to time, add calcium-based grease to the bearing once every 8 hours, and add calcium-based grease to the bearing once every 24-48 hours of work;

Three, 3-5 days to check whether the conveyor deviates;

4. Regularly check whether the circuit connectors of the electrical cabinet are loose;

5. The shredding material of the metal shredder equipment is the material below 4mm and the steel bar below φ12mm, and the production line must cut the material evenly;

Six, try not to enter super thick materials, and prohibit materials with steel grades from entering the inside of the machine.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。