How to maintain the bearing of metal shredder

The bearing is an important part of the metal shredder, and it can also be said to be the backbone of the entire equipment and the driving part of the power core. The performance, life and reliability of the bearing determine the performance, life and reliability of the equipment. The normal operation of the bearing is the guarantee for the efficient operation of the equipment. Only regular maintenance and maintenance can prolong the life of the metal shredder. Moreover, maintaining the bearings is also an effective measure to prolong the life of the metal shredder.

1. The metal shredder should regularly check the lubricating oil of the bearing in daily work, and the metal shredder should not be allowed to work in the state of lack of oil, and the level of lubricating oil should be tested. Too much or too little grease is related to the heat level of the shredder. As an important fixed part of mechanical equipment, screws are also related to the heat generation of metal shredder bearings. For example, whether the bearing cover of the metal shredder is too tight, resulting in too small clearance of the bearing. If the clearance of the bearing is too small, the friction will be greater, which is also the reason for the heating of the bearing.

2. The lubricating oil used in the bearings of the metal shredder should be appropriate. It should also be noted that the bearings must not be wet. When the metal shredder is designed, the sealing problem has been considered, so the equipment has been filled with oil and sealed before leaving the factory. There will be no problems under normal use, but if the bearing box is found to be damaged after a long time If it is damaged or there is oil leakage, it is necessary to check the sealing ring. If the damage is serious, it needs to be replaced, and the bearing is cleaned and lubricated.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。