How to increase the output of the scrap metal shredder

As a special equipment for waste material recycling, the metal shredder not only reduces the waste of waste metal, but also greatly improves the utilization of waste materials, reduces the waste of raw materials and also improves the surrounding environment. For users who intend to purchase this equipment, understanding the working principle of the equipment can provide great help to the purchase of equipment, and then I will share with you the working principle of the metal shredder.

Working principle of metal shredder

Materials enter the shredder through the feeding system. The body is equipped with a shredding cutterhead. The cutterhead is used for cutting, cutting, tearing and pulling. It is connected to the worm gear reducer motor, directly installed on the driving shaft, and the speed is changed through the reducer. It is transmitted to the driven shaft, and the moving knife on the driving shaft forms relative motion with the stationary cutter head on the casing. The spiral-toothed cutterheads on the main shaft are arranged in a staggered manner. After the material enters, it will be shredded into small pieces by the comprehensive action of shredding blades such as tearing, extrusion, and shearing, and then discharged from the lower part of the box, so that the material can be shredded.

How to increase the output of the shredder

The first thing to do to increase production is to prepare before starting the machine. Before starting to work, check the shredder. When shredding the material, choose the same kind of material, and feed evenly when feeding. Do not put in a lot of material at one time. This may cause the machine to jam. You have to wait for all the materials to be shut down. Shut off device after draining. The last is maintenance and lubrication. Effective maintenance of the shredder can greatly improve the production efficiency and output of the shredder.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。