Reasons and solutions for the noise of metal shredders during work

Some users report that the metal shredder will make too much noise after being used for a period of time. The appearance of noise, sometimes the appearance of noise indicates that there are some faults in the equipment, so if there is noise, it is necessary to check the source of the noise technically to see what is causing it, and judge the fault of the metal shredder from the operating sound of the equipment It is also a way of maintenance. Let me explain in detail some reasons and some solutions for the possible noise of metal shredders.

1. If the equipment produces noise during high-speed operation, then you need to check the bearing;

2. If the lubricating oil is insufficient, you need to add lubricating oil;

3. If the bearing and shaft are misaligned, it needs to be adjusted in time;

4. If the bearing is worn out, the bearing needs to be replaced;

5. If it is because the anchor bolts are not fastened, then during maintenance and maintenance, the bolts should be imprisoned, or a shock absorbing device should be installed to reduce the vibration;

6. If the equipment is maintained and maintained in a timely manner, the occurrence of noise-like failures can be greatly reduced, and the service life and production efficiency of the metal shredder can also be effectively improved.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。