How to prolong the service life of metal shredder

How to extend the production life of metal shredders is a concern for users, and it also has an important impact on improving the production efficiency of metal shredders. A metal shredder with a long service life can improve the use of equipment Efficiency, creating greater economic value for users, so today Zhengzhou Shuguang will introduce several methods to extend the service life of metal shredders:

There are many different methods for the maintenance of metal shredders, and each method can improve the working efficiency of metal shredders. After the daily production of the metal shredder is over, it is necessary to clean up the inside of the equipment in time, and check the wear of the vulnerable parts such as the screen and claws. If the wear is serious, it needs to be replaced in time to prevent the expansion of production problems.

The grease inside the metal shredder needs to be filled frequently. Just press the grease into the inside of the bearing. If the grease has deteriorated or other problems, the bearing should be cleaned and replaced with new grease in time. For the metal raw materials that need to be crushed, they should be cleaned up in time to remove the impurities as much as possible, especially the relatively hard impurities such as copper, iron, stones, etc., to prevent them from being mixed into the crushing chamber. These impurities will cause damage to the metal shredder as a whole. . In addition, the speed of the metal shredder cannot be increased arbitrarily, if it exceeds the rated allowable value, it will easily cause damage, which also requires special attention.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。