The structure principle of metal shredder

During the working process of the metal shredder, the power is stably transmitted to the main shaft through the reducer connected to the motor, and under the traction of the main shaft, the shredder blade fixed on the main shaft will enter the machine cavity of the metal shredder. The scrap metal is clamped, and the material is drawn into the gap between the two shafts during the continuous pressing of the blade clamping position, and the material is crushed through the tearing effect of the two shafts. The crushed material usually presents a strip or sheet shape. The filter at the bottom of the equipment is sent to the material pair through the conveyor belt for centralized processing or direct collection by other equipment.

1. Special moving and fixed blades for metal shredder

The shredder blade is divided into a fixed knife and a moving knife. The fixed knife is fixed on the main shaft of the shredder through the internal hexagonal locking hole to crush the material.

2. Main shaft of metal shredder

The regular hexagonal interface shaft is linked with the reducer through bearings and couplings.

3. Metal shredder chassis

Mainly provide support for the installation of bearings and the fixation of the main shaft, and at the same time provide a relatively closed space for four-axis or two-axis linkage crushing.

4. Metal shredder bearing

Through the internal pressure cylinder to reduce the friction force during the rotation of the spindle, thereby reducing the torque loss.

5. Metal shredder reducer

Adjust the output speed of the motor through the reducer, reduce the motor damage caused by the impact of the spindle, and increase the torque of the spindle.

6. Support frame, main body, motor, hopper, power distribution cabinet, electromagnetic reversing valve, etc. controls and other accessories.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。