How to prolong the service life of plastic shredder machine

When using a plastic shredder machine, it should be operated strictly in accordance with the operating regulations. At the same time, pay attention to the daily maintenance and maintenance of the equipment, discover and solve the problem in time to ensure the performance and service life of the plastic shredder machine.

1. Careful inspection of the plastic shredder machine before booting. Including the degree of connection and fastening of each component of the plastic shredder machine, the operating status of the transmission system, and the integrity of the electrical lines. Cause damage.

2. The feeding operation is irregular. If the feeding speed of the fragmented machine is too fast, the amount of feed is too large or the feed is uneven, these will bring huge pressure to the fragments, cause excessive wear or even damage to key components such as tools and bearing. If the feed contains other foreign bodies or impurities, it will also cause impact and damage to the machine during the shredding process.

3. In the case of harsh environmental conditions such as high temperature, high humidity, and corrosive environment, no effective protection measures are taken. These environmental factors will accelerate the corrosion and damage of the metal components of the equipment, which will adversely affect the performance of electrical components, so as to thus Causes chronic damage to plastic fragments.

4. For a long time continuously, high -intensity runs without reasonable stop and maintenance arrangements. This will cause each component of the device to be fatigue for a long time, easily cause failure and performance, and cause continuous damage to the fragmented machine.

5. Learn the daily maintenance and maintenance of plastic shredder equipment. It is not possible to regularly clean up the debris and debris inside the machine, which will affect the heat dissipation and normal operation of the machine; it will not be replaced in time for severe wear tools, bearing and other components. There will be greater accidents.

6. The operator lacks knowledge and skills. It is not familiar to the performance characteristics and operation specifications of plastic fragments, and errors may occur, such as incorrectly adjusting machine parameters and unreasonable use of machine functions, so as to cause unnecessary damage to the equipment.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。