Ensure that safety operation of scrap metal shredder

Large metal shredder not only improve the shredding efficiency of metal, but also expand the application scope of waste metals. When using the scrap metal shredder machine, there are some safety operations that require us to pay special attention to ensure that safety operation of scrap metal shredder.

1. Before starting, you should move the transmission wheel with manpower for one or two circles. After confirming the flexible movement, the metal shredder machine will start to open the action. 

2. Before the metal shredder is stopped, it should be stopped and discharged the material in the machine before cutting off the electric motor power.

3. Pay attention to the temperature of the bearings during operation, keep the bearings in a good lubrication state, and pay attention to the abnormality of the audio and vibration. When it is found that abnormal conditions, the first stop is to check whether it is stuck by the object, or the metal shredder is damaged.

4. To ensure the uniform feeding of the metal shredder machine to prevent overload. Strictly prevent objects that cannot be torn into the machine.

5. During the operation of the scrap metal shredder machine, it is strictly forbidden to clean up by hand, sticks, bamboo slices, iron shovels and other objects, or clean it with brooms.

6. When the scrap metal shredder machine are stopped, it is necessary to check whether the fastener bolt is firm and how much wear at the ground. For some severe wear, it should be replaced and repaired in time.

7. After running, pull off the power gate, cut off the power, and do a good job of aftermath before leaving.

Henan Honest Heavy Machinery : http://www.honestshredder.com/，All rights reserved。